Description
of
the
products
Front Panel:
• EP - 300
• EP - 500
• EP - 800
Front Panel:
• EP - 1000
• EP - 1300
• EP - 1800
1,
Clip/Limit LED’s
- These LED’s flash when the output signal starts distorting.
2,
Gain Control: Left Channel
- Adjust the desired volume here.
3,
Power LED
- This LED illuminates when the amplifier is switched on.
4,
Protect LED
- If this LED is illuminated during operation, one of the protection circuits is active.
Please take the amplifier out of operation and have it tested.
5,
Gain Control: Right Channel
- Adjust the desired volume here.
6,
Clip LED
- This LED flashes when the output signal starts distorting.
7,
Power Switch
- Press this button to start the operation.
8,
Parallel LED
- This LED illuminates in parallel.
9,
Bridged LED
- This illuminates in bridged mode.
3
