12
Display illumination is turned on and off using key
.
According to 1.5.8 (menu option
ADDITIONAL SETTINGS
), a time period in
seconds when illumination is on if any of the keys is depressed, may be set up.
If the display shows intermittent messages or dashes rather than DOC or
temperature values and the audible overload signal is on, refer to 1.5.9.
1.5.6 Measurement results saving in the scratchpad
To enter measurement results in the scratchpad, depress
key for 0.5 s.
The display shall show the list of folders made by a user including
SHARED
FOLDER
. Using
and
keys move the cursor against the folder required,
for instance,
SHARED FOLDER
, and depress the key
.
If there are no folders made by a user, data shall be entered in the
SHARED
FOLDER
.
The display shown in Fig. 1.5 shall appear for 2 s, and then the analyzer
shall change the current mode to the measurement mode.
Fig. 1.5
The selected folder shall contain the following:
date and time of measurement;
temperature of analyzable fluid;
DOC value measured in ppb (in ppm) or in saturation % according to the
selected operating mode.
If the pad is filled to capacity, on entering data the display shall show the
message "SAVING IS IMPOSSIBLE, SCRATCHPAD IS OVERFILLED".
RECORD
ENTER
MODE
▲
MENU
▼
RECORD
ENTER
EXIT
SHARED FOLDER
- - - - - - - - - - - - - - - - - - - - - - - - -
RECORDED!
►24 Sep. 13:56 36.1°С
О
2
= 199.9 ppb
