9
Pump, hose and accessories should always be emptied of water prior to storing as
follows:
1.
Switch off the machine and detach water inlet hose.
2.
Restart the machine and in short bursts, briefly activate the trigger of the pressure
gun until no more water runs through the pressure gun.
3.
Stop the machine, unplug and wind up hose and cable.
4.
Place pressure gun, lance, nozzle and hose on the storage hook of the machine.
WARNING:
The machine should be stored in a room that will be free from frost.
Should the machine accidentally not be drained correctly and then allowed to freeze,
it will be necessary to check every part/component for damage which may have been
caused by expansion.
Never start up a frozen machine or use machine when the outside temperature is
freezing or below! Frost damages are not covered by the guarantee and can also result
in dangerous pressure releases/bursts.
4. After use instructions
