background image

8. 

This  product features  a thermal  safety  cut-out  device.  Should  the vacuum 

overheat power will instantly be stopped.  In this event, the device should  be 

switched  off, and  left to  cool  completely  before attempting  to  use again.

 

9. 

Ensure the appliance  is completely  switched  OFF via the  main body and at 

the socket  before  removing from the  battery  charger.  Do not overstretch  the 

charging  cable.

 

10.   D o   not  submerge  any  part  of  the  appliance  in water. 

11. 

  When  removing  the charger  plug from the  mains supply, do so from the 

plug itself  and not by the  means of the  cord.

 

12. 

  Ensure that all vents and openings are kept clear of dust, lint, hair and 
anything  that  may  reduce airflow. A  clogged vent  may cause the product to 
overheat.

 

13. 

  Ensure that hair, loose clothing, fingers, and all parts of body are kept away 
from the openings and moving parts of the vacuum.

 

14.   This product uses a lithium-ion battery. Waste batteries should be safely 

recycled where possible. 

15.   The appliance is only to be used with the battery provided in conjunction with 

the supplied charger. 

16.   Store battery away from high temperatures. 

17.   Do not pierce or attempt to open the battery under any circumstances. 

18.   In the event of a leaking battery, ensure that acid stays away from skin 

and eyes. If acid comes into contact with skin or eyes- rinse with clean, 

fresh water and seek medical advice immediately. 

19.   Extra care must be taken when vacuuming the stairs. 

20.   Ensure the appliance is turned off before connecting any accessories. 

21.   This appliance is not suitable for vacuuming liquids or wet surfaces. 

22.   Do not leave this product for extended periods of time in direct sunlight. 

23.   Any person using this product should be fully aware of the hazards 

involved. A responsible adult should always ensure the product is used 

under supervision or that adequate instruction has been given to adults 

with reduced physical mental or sensory capabilities, or anyone with a lack 

of experience using a similar product. This product is not a toy. Children 

under 16 should be supervised to ensure that they do not play with this 

appliance. 

24. In the event the appliance is not working correctly. Please use the 

troubleshooting and maintenance advise below. Should this not resolve the 

issue please contact Vytronix Ltd. 

25. Ensure the appliance is checked prior to first use for any damage or defect. 

Contact Vytronix Ltd upon receipt.   

26. Ensure correct maintenance of the appliance is followed on a regular basis. 

 

Summary of Contents for LION29















Reviews: