EMPTYING/CLEANING
1. Remove the dust container by pressing the release button and taking the
dust container off of the main body. (pic1)
2. Pull the filter out while holding the container over a suitable vessel or bag to
avoid spillage. (pic2)
3. Empty the contents of the dust container into a suitable vessel or bag. (pic3)
4. The filter can then be shaken/tapped clean or rinsed by hand using warm
water. (pic4)
5. Re-install the components in the opposite order to which they were
disassembled.
PLEASE NOTE: Always allow 24 hours drying time and ensure all parts
are fully dry before they are re-installed
.
