USE Vacuum cleaning
1:Before using the device first roll out a sufficient length of mains cable and plug into the mains socket. The
yellow mark on the electric flex cable is the maximum length that must not be exceeded.
To switch on the device, press the foot pedal button on the casing with your foot
2:To rewind the power cable, press the button
Hold the cable with one hand and guide the cable to ensure that it does not whip causing damage.
Caution:
Never operate the vacuum cleaner without the dust bag or motor filter, otherwise the device could be
damaged.
How to use MIF bag
If the suction power is reduced, this may indicate the necessary changing the dust bag. Raise the nozzle off
the floor, set the suction power regulation to MAX, switch on vacuum cleaner using the on/off switch, and
check the dust bag full indicator. If it is red, the bag must be changed.
Switch off and unplug the appliance.
Remove the hose, open bag cover by pushing latch up and lifting bag cover.
Carefully remove the disposable bag from the vacuum cleaner.
Install new bag in the vacuum cleaner.
The bag compartment cover will not close if no bag is installed in the vacuum cleaner.
Don't forget to register for your 12 month guarantee at www.vytronix.com
using product code brandnew-vytronix-bggc01
