www.soltection.com
Soltection RJ-1 Installation Manual
Page 8
Remove any roofing nails beneath the 1
st
, 2
nd
, or
3
rd
course of tile that obstructs the position of
the roof flashing.
STEP 4
DRILL PILOT HOLE
Slide RJ-1 Junction box into place where you
cut shingle template.The image above shows
where you will drill in the next step
STEP 5
Position the top edge of the
template 1/2"
above the 1st course
of shingle as shown.
STEP 2
Trace and continue using a lumber crayon to the
bottom of the 2nd course. Cut along lines and
remove shingles.
STEP 3