USER INSTRUMENTS (cont)
11
Bank 1:
1. OSCILLATOR - oscillator type: SQUARE, SINE, SAWTOOTH, TRIANGLE, TRIANGLE 4 BIT, FM, SINE QUAD, WAVE, LOOP + TABLE
2. PITCH FREQ - initial pitch (0 to 255, or double press for chromatic scale)
3. PITCH SWEEP - sweep of oscillator pitch (-127 to 127)
4. WAVE INDEX - index of sample for WAVE & WAVE LOOP oscillators, or index of algorithm for WAVE TABLE oscillator
5. VOLUME
- initial volume of instrument
6. VOL. SWEEP - sweep of volume
7. PERIOD
- total length of sound (or until next sound if enabled)
8. NEXT INST - SILENCE or any other instrument triggered upon end of current sound
Bank 2:
1. FILTER TYPE - select digital filter type: OFF, LOWPASS, BANDPASS, HIGHPASS
2. CUTOFF FREQ - initial cut off frequency (0 to 255)
3. CUT. SWEEP - cut off frequency sweep (-127 to 127)
4. RESONANCE - initial resonance (0 to 255)
5. RESO. SWEEP - resonance sweep (-127 to 127)
6. ---
- unused
7. ---
- unused
8. ---
- unused
Bank 3:
1. NOISE TYPE - select from different noise types: OFF, STATIC, METALLIC, PITCHED, SQUARE, TRIANGLE, SAWTOOTH, PULSE
2. NOISE FREQ - frequency clock for pseudo random number generator
3. NOISE SWEEP - noise frequency sweep
4. NOISE VOL - noise volume
5. PULSE WIDTH - initial pulse width of square wave oscillator
6. PULSE SWEEP - pulse width sweep
7. ---
- unused
8. DAC BITS
-
DAC
masking bits
Bank 4:
1. LFO WAVE - OFF, SQUARE, SINE, SAWTOOTH UP, SAWTOOTH DOWN, TRIANGLE, RANDOM, PULSE, STEP UP + DOWN (3/4/8)
2. LFO FREQ
- frequency
3. LFO RANGE - amplitude
4. LFO TRIG
- free running, start on first step, every step or trigger upon instrument start
5. LFO DEST
- modulation destination, oscillator frequency, volume, cutoff, resonance, noise freq or volume, pulse width
6. SUB PITCH
- sub pitch offset for FM oscillator
7. SUB LEVEL
- sub modulation level for FM oscillator
8. OPTION MENU - SAVE, LOAD, RESET current instrument, or QUIT
ADJUSTABLE PARAMETERS:
