INSTALLATION
1) Headset Pairing Mode:
Put the headset in to pairing mode (voice prompt ‘Discovering’;
should be heard in the headset).
2) Insert The BT1 Into A USB Port On The Computer:
Plug the dongle into an available computer USB port.
3) Pairing Mode:
The dongle will initialize and go into paring mode while the computer
loads the necessary driver.
4) Headset Will Connect To The Dongle:
The headset should connect with the dongle either during the initial-
ization process or shortly after.
5) Headset Connected:
Once connected you should hear the voice prompt “Your headset is
connected”.
dongle and repeat this procedure.
It may be necessary to so into the PC’s sound settings to prioritize the
headset as the primary Microphone and/or Speaker. Please visit
www.vxicorp.com/usb
operating system.
Step #1
Step #2
