3
Warning
This microscope is a scientific precision instrument designed to last for many years with a minimum of main
-
tenance. It is built to high optical and mechanical standards and to withstand daily use.
We remind you that this manual contains important information on safety and maintenance, and that it must
therefore be made accessible to the instrument users.
We decline any responsibility deriving from incorrect instrument use that does not comply with this manual.
Safety Information
Avoiding Electrical Shock
Before plugging in the power supply, make sure that the supplying voltage of your region matches with the
operation voltage of the equipment and that the lamp switch is in off-position.
Users should observe all safety regulations of the region. The equipment has acquired the CE safety label.
However, users do have full responsibility to use this equipment safely.
Please follow the guidelines below, and read this manual in its entirety to ensure safe operation of the unit.
Package Contents
DESCRIPTION
QUANTITY
Microscope stand with focus and illuminators (NO illumination
on -OH versions)
1
Optical stereo head
1
Eyepiece WF10x/20mm
2
Disc for transmitted illumination (NOT included in -OH versions) 1
Dust cover
1
Unpacking
The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the contai-
ner and lift the top half of the container. Take some care to avoid that the optical items (head and eyepieces)
fall out and get damaged. Using both hands (one around the arm and one around the base), lift the microsco-
pe from the container and put it on a stable desk.
Place the observation head onto the top of the arm and tighten the lock-screw. Insert the eyepieces into the
eye tubes.
Connect the provided power supply cable to the input socket on the rear of the microscope.
