vwr.com I Instruction manual VWR
®
ULT Freezer 352/528 Eco Premium 02/2022
Page 65/86
18. USB-Menu: Data transfer via USB interface
A USB interface for data transfer via USB stick is located in the controller housing.
The controller offers an import function and three export functions through the USB interface:
Import function (chap. 18.2):
•
Configuration data in file “KONF380.set”
Export functions (chap. 18.3):
•
Configuration data in file “KONF380.set”
•
Recorder data
- DL1 (chamber data for the user): “DL1_[MAC address of the chamber].csv”
- DL2 (chamber data for Avantor Services): “DL2_[ MAC address of the chamber].csv”
- Event list: “EvList_[MAC address of the chamber].csv”
For detailed information on the file content see chap. 17.1.
•
Service data
The "Service" folder is created on the USB stick and can be sent Avantor Services. In addition to the
configuration and recorder data, it contains further service-relevant information.
18.1 Connecting the USB stick
Connect the USB stick to the interface located in the controller housing.
Connect only USB sticks to the USB interface.
The USB stick must be formatted with FAT32 and have at least 8GB of memory.
After inserting the USB stick, the initial function “Import configuration” is displayed.
As long as the USB stick is connected, only the functions for data transfer are available. Other controller
functions are only available after removing the USB stick.
18.2 Import function
Required access level: “Admin”.
Function “Import configuration”.
To import configuration data from the USB stick, press the
OK but-
ton
.
Import configuration
With the
arrow-down button
you can now change to the setting of the “Export configuration” function.
