20
§
Insert tab “3” into its slot.
§
Press the front of the cover inwards to pop tab “4” into its slot.
§
Examine the fit of the cover in comparison to the other lens. Press more firmly to
seat tab “4” if the lens is not completely locked into the frame.
§
Remount the camera, as shown above.
Remount the camera and wipe away any fingerprints with a clean microfiber cloth
and you’re ready to go.
Go to the Vuzix website for more information on
Vuzix Wrap Lens Covers
.
MHL (Mobile High-Definition Link) is a standard used primarily by tablets and
smartphones to provide HDMI connectivity through a smaller micro USB port. It
sends the audio and video signals through the micro USB connector and converts it
to a HDMI signal for use on supported devices, such Vuzix eyewear equipped with
an HDMI compatible Controller. The signal remains in digital format throughout
the conversion process, avoiding quality is lost.
A Micro USB to HDMI MHL Adapter enables MHL device, such as an HTC EVO
3D or Samsung Galaxy S3, to connect to HDMI enabled eyewear models for audio
and all of the HDMI supported video resolutions. It also supports 3D video and
HDCP media protection when used with HDMI enabled Vuzix eyewear models.
Most MHL devices require an external power source from their internal batteries, to
drive the adapter and to power the eyewear. In many cases this power requirement
exceeded the output of typical USB ports on a computer. Though connecting to a
computers USB will charge the eyewear Controller’s battery if the eyewear is not in
use, it may not provide sufficient power for indefinite use. For the shortest charge
time and to enable indefinite use of an MHL connected eyewear session, supply
power to the MHL Adapter from the power adapter provided with your eyewear,
with no other USB devices connected.
The following is a partial listing of MHL mobile devices from three popular
manufacturers:
Some MHL devices
may require an
additional 5-pin to
11-pin Micro USB
Adapter for MHL
Adapter.
