The following are the step-by-step directions for configuring a Windows 7 system.
Windows 7 Display Setup
§
Right-click on an open area of your desktop and select “Screen resolution”.
§
From the “Multiple displays:” drop list, select “Duplicate these displays”
§
Choose “1280 x 720” from the “Resolution:” drop list,
§
Click on “Advanced Settings”.
§
Select the “Monitor” tab.
§
Select a “Screen refresh rate:” of “60 Hertz”.
§
Apply the changes and close the Control Panel.
Tracker Calibration
The last step in the setup process is to calibrate the Wrap Tracker. If you are not
planning to use the Tracker, you can by-pass this step. The tracker is not required for
eyewear display or camera function.
Your Wrap Tracker uses multiple sensors for calculating movement and positioning,
including magnetometers. Magnetometers are influenced by magnetic fields and
certain electronic devices and therefore require an initial calibration and re-
calibration whenever its operating environment changes. The Tracker also contains
gyroscopic sensors that require zeroing before calibration.
Note:
Certain metals and electronic devices create electromagnetic fields that will influence the
Tracker. Typical examples include, metal framed buildings and speakers, including a sub-woofer
sitting under your desk.
Note:
For the best calibration results, the video display should be active during the calibration process
and its earphones anchored in the holder along the stems to maintain a consistent orientation
as they too contain magnets.
