Vutlan VT325, Manual

Page: 3 / 17

Back panel:
1. " " - x2 pcs for mounting brackets into a 1U 19" rack slot. 1U 19 inch brackets
2. " " - Displays article number of the monitoring unit. Logo sticker
3. " " - A place for a sticker, can be used by a user to place an identifier of the system (for example, an IP Sticker space
address).
4. " .. " - 8 RJ12 analog sensor inputs with auto-sensing. Read instructions at " ", Analog sensors: A1 A8 Analog sensors connection
" ". Sensor configuration
5. " " - Ethernet 10/100 Base-T port, provides an Ethernet connection. Read more in this section " LAN port LAN, GSM, LTE,
". RADIUS, DNS, SSL, VPN
" " - orange LED for Ethernet port. It shows network traffic. Orange LED
" " - green LED for Ethernet port. It shows network traffic. Flashes green when the system starts up. Shows Green LED
the connection state (constant green light - the connection is established, blinking green - the connection attempt).
6. " " - " " can be installed in this slot. Modem slot VT790 / LTE slot modem Read instructions This modem is ordered separately.
at " VT790 / LTE slot modem ", " LAN, GSM, LTE, RADIUS, DNS, SSL, VPN ".
7. USB ports are needed for USB camera recording, USB Flash for system logs, and for the system restore. Read instructions
at "
", " ", " ", " Connecting USB camera USB camera settings. How to save a video Saving system logs on USB flash drive USB
". upgrade or restore of default settings
a. " " - type micro USB-port 2.0, required to connect a USB camera. USB 0
b. " " - type USB-port 2.0, required to connect a USB camera or a USB Flash card. USB 1
8. " " - MicroSD card slot with an ejector. The card is needed for data storage or for the "system restore". Read SD card
instructions at " ", " ". Saving system logs to SD card Restore of the appliance (for VT960 series)
9a. " " - digital connector RJ12 for the connection of CAN sensors/extensions/devices on a CAN bus. Modules can CAN DEVICES
be chained together. Read instructions at " ", " ". CAN devises connection Setting up CAN
" " - green LED indicates CAN bus status. LED: CAN
The LED blinks slowly - nothing is connected
The LED blinks fast - configuration is in process
The LED glows constantly - connected to CAN devices
11. " " - ac/- 1 °C. TEMPERATURE SENSOR
12. " " - green LED indicates appliance system status, LED: ACT
- operating mode of the device: switches at a frequency of 2 times per second;
- successful completion of the software update process: switches at a frequency of 4 times per second;
" " - The button can be programmed from the interface for alarm indicating. LED: ALARM
" " - red LED indicates error and traffic. LED: ERR
the operating mode of the device: If everything is normal, the LED is extinguished, if not - there's a constant glow;
software update mode: switches at a rate of 2 times per second;