VUTEC CORPORATION
TEL: (954) 545 9000
FAX: (954) 545 9011
E-MAIL: [email protected]
Figure 2
Figure 3
Backside of frame
Cross section of frame
Place the screen frame on a clean and flat surface with the backside face up.
Attach the screen fabric to the frame by placing the Velcro on the fabric over the Velcro on the frame. Adjust and
stretch tight the screen surface as necessary.
Referring to Figure 3, place the complete screen over the four mounting brackets on the wall. The screen should be
approximately 1/2 inch from the wall when the mounting holes are lined up. Insert and tighten the four 10-32 x 3/4
screws through the frame into the mounting brackets.
Insert the four hole plugs.
Hardware supplied:
(4)
Corner bracket
(4)
Wall mount bracket
(12)
#10 x 1 1/2 long screw
(24)
1/4-20 x 1/2 long button head cap screw
(24)
1/4 external tooth washer
(4)
#10-32 x 3/4 long pan head Phillip screw
(4)
Hole plug
(1)
5/32 hex key
