6
the microSD memory card:
1.
Turn OFF the scanner.
2.
Insert the microSD card into the microSD card slot (with metal side facing upwards). Gently press in until
the card is clicked in and latched.
4.3 Turn on/off the Scanner
Turn on/off the scanner by pressing and holding .
Note:
If the scanner is turned on for the first time, it will enter Date & Time/Language setup mode. Once the Date &
Time/ Language setting is completed, scanner will enter into standby mode.
By default, Auto-off feature is set to 3 minutes. If the Auto-off feature is set at "3 Min" (refer to section 4.7),
the scanner will automatically turn off if scanning action is not detected within 3 minutes.
To set Date & Time/Language:
1.
Press to jump to next setting option: YEAR
Æ
MONTH
Æ
DATE
Æ
HOUR
Æ
MINUTE.
When setting up the value for MINUTE, press to switch to the previous setting option until it
reaches the YEAR option.
2.
Press or to set the figure corresponding to each setting.
3.
Press to confirm and move to next setting.
4.
After completing the setting for MINUTE, it will enter Language setup screen.
5.
Press or to select your desired language.
6.
Press to confirm and enter into standby status.
