-
6
-
Fig. 2
Fig. 3
The supply pressure (upstream of the regulator) should be 7 -
9” W.C. for natural gas and
11-
12” W.C. for propane gas. At no time should the griddle be connected to supply
pressure greater than ½ psig (3.45 kPa) or 14” W.C.
PROPANE GAS CONVERSION
This griddle is shipped from the factory equipped with fixed burner and pilot orifices for
natural gas operation. The burner and pilot orifices required to convert the griddle to
propane gas are shipped with the griddle in the shipping packaging. It is recommended
that a trained gas service technician with the necessary tools, instruments and skills
perform the conversion.
Prior to lighting, check all joints in the gas supply line for leaks.
Use soap and water solution. Do not use an open flame.
To convert to propane, following steps
must be completed:
1. Remove all natural gas burner
orifices
and
install
the
provided
propane burner orifices. See Fig. 4
2. Remove all pilot orifices and install
the provided propane pilot orifices.
See Fig 4.
3. Set the regulator to 10” W.C. by
inverting the regulator spring plug.
See Fig 5.
Fig. 5
Fig. 4
PILOT
ORIFICE
BURNER
ORIFICE
