Fig. 15
2.
Note and disconnect thermopile to high limit
switch wiring.
Fig. 16
3.
Loosen thermopile holding nut (1, Fig. 17).
Fig. 17
4.
Remove thermopile from bracket.
5.
Reverse to install.
PILOT
Shut off the gas before servicing the
unit and follow lockout / tagout
procedures.
All gas joints disturbed during servicing must be
checked for leaks. Check with a soap and water
solution (bubbles). Do not use an open flame.
1.
2.
Remove pilot assembly bracket.
LG Series Fryer - REMOVAL AND REPLACEMENT OF PARTS
F45691 (1117)
Page 8 of 23
