Vulcan-Hart EV12 Series, Service Manual

Page: 10 / 33

Fig. 14
4. Remove oven racks.
5. Remove oven bottom.
6. Loosen element mounting brackets (1, Fig. 15).
7. Remove element mounting screws (2, Fig. 15).
Fig. 15
8. Remove bottom element from mounting brackets
and lift out of the oven cavity.
9. Reverse procedure to install.
NOTE: Work mounting brackets around until element
is secured without force.
10. Check range for proper operation.
FRENCH PLATE
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Remove RANGE TOPS.
2. Remove electrical connections noting their
locations (1, Fig. 16).
Fig. 16
3. Support the French Plate (1, Fig. 17).
A. Remove the nut, spring washer, and locking
bracket (2, 3, 4 Fig. 17).
Fig. 17
4. Remove French Plate from range top.
5. Reverse procedure to install.
6. Check range for proper operation.
EV Series Electric Ranges - REMOVAL AND REPLACEMENT OF PARTS
F45586 (0716) Page 10 of 33