Fig. 4
4.
Remove fasteners from element head.
5.
Grasp heating elements and pull up. Head cover
will separate from element head base.
6.
Place heating elements / element head cover on
2x4 lumber.
7.
Reverse procedure to install.
CONTROL BOX ASSEMBLY
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1.
2.
Rotate and lift to remove fryer door plate (Fig.
5).
Fig. 5
3.
Disconnect harness from connector.
4.
Remove two screws (Fig. 6).
Fig. 6
5.
Pull control box assembly away from side wall.
NOTE:
Document wire connections.
6.
Disconnect wires from indicator lights.
7.
Remove screw and back from control box
assembly.
8.
Reverse procedure to install.
CEF40/75 FRYER - REMOVAL AND REPLACEMENT OF PARTS
Page 5 of 25
F45657 (0517)
