8
3. Line up a strip of nails with points down and drop into the magazine
4. Slide the nails forward in the magazine. The magazine will hold 100 nails at 28
degrees.
5. Push the lock forward and allow the feeder shoe to slide forward against nails.
6. Rotate the exhaust cover (Item 4), so that the exhaust air blast will be directed
away from the operator: Grasp the deflector and rotate it to the desired
position.
2. Pull feeder shoe all the way to the rear, until it latches
CAUTION
!
=
Disconnect tool from the air supply.
=
Keep tool pointed away from yourself and others at all times.
=
Be sure the tool has an empty magazine when connecting to the air supply
=
Do not load fasteners with trigger or safety pressed.
=
Always wear approved safety glasses, and hearing protection when preparing
or operating the tool.
LOADING FASTENERS
1. After reading and understanding this entire manual,
Summary of Contents for 839-8224
Page 15: ...15 SCHEMATIC DRAWING...