Vulcan-Hart 36ESB, Service Manual, Page: 5 / 14

REMOVAL AND REPLACEMENT OF PARTS
FRONT PANEL
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Remove screws that secure front panel to broiler.
2. Remove INFINITE SWITCH / 3 HEAT SWITCH
from front panel.
3. Reverse procedure to install.
Fig. 1
LEFT SIDE PANEL
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Remove crumb tray.
2. Remove FRONT PANEL.
3. Position the rack assembly to access panel
screws in the broiler opening area.
Fig. 2
4. Remove screws securing left side panel. Slide
panel toward the front of broiler until panel clears
front mounting area then remove the panel.
Fig. 3
5. Reverse procedure to install.
SALAMANDER ELECTRIC BROILER - REMOVAL AND REPLACEMENT OF PARTS
Page 5 of 14 F45545 (0315)