Quick Installation and Set Up
Open the battery compartment located underneath the mouse and
install the 2 AA batteries. Note the polarity signs in the battery
compartment.
Turn on the power to your computer and make sure your Windows
operating system is active.
Install the Software CD Driver that has been included and you may
now go on to section Programming the Hot Keys on the Keyboard
and Mouse.
Note:
Install the Software before plugging in the
receiver.
Insert the USB Receiver into an available USB port. Your computer
will recognize the USB device and make the proper settings to
enable you to operate your mouse. Click on any button on your
mouse to connect with the receiver. Move the mouse over the
surface to establish a connection with the receiver.
1) If the mouse does not work, please see the Troubleshooting information of this
manual.
2) Caution: Before your mouse can be connected, you need to position the devices
within 6 feet of the receiver to establish the initial connection.
Note:
The
Windows operating systems will search for the new
USB HID
products and load the
built-in standard
USB HID
device driver automatically. The system may ask for the Windows
2000 full Operating System CD if it needs the driver to update the operating system. (Windows
XP and Vista Operating System CD is not required).
Follow the instructions and complete the standard
USB HID
reorganization process.
