Using NFC for pairing
When a smart phone or tablet device is equipped with NFC, bluetooth pairing(and depairing) can be
performed simply by merely swiping the device over the headphones.For operating details consult the
user’s manual for the device to be connected.
Supported OS: Android 4.1 or later
Depending on the smart phone or tablet device used, the NFC signal reception may be too weak to
perform one-touch connections. In that case, follow the manual pairing procedure outlined in Pairing.
Connection
With the headphone power OFF, hold MFB button depressed for five seconds or more to enter the
pairing mode.
Swipe the device to be c
onnected about 1 cm above the “N-mark” on the left side the wireless
headphone.
The device will automatically begin pairing. Pairing is confirmed when the LED indicator flashs blue at
interval of three seconds.
Only one device can be connected at a time.
Disconnecting
With the wireless headphones connected to the bluetooth device, swipe the connected device about 1cm
above the “N-mark” on the left side of the headphones. The connection will be automatically undone.
Making calls with the headset
Functions
Status of headset
Operation
Redial Last number
Standby mode
Short press MFB twice quickly
Volume up
Conversation mode
Press and hold
“+” button
Volume down
Conversation mode
Press and hold
“ - “ button
Answering calling
Ringing
Short press MFB button
Reject calling
Ringing
Press and hold MFB button for
one second, and release
until you hear indication
sound
Transfer the calling between
headset and Bluetooth
devices
Conversation mode
Press and hold the MFB
button for 3 seconds can
transfer the conversation
from headset to mobile
phone. Then press and hold
the MFB button for 3
seconds to transfer the
conversation back from
mobile phone to headset.
Notes:
Not all the mobile phones support all the functions listed above. Please refer to the
instruction of your mobile phone. Some functions and indication tones may vary with mobile phones
