background image

 

C H A P T E R   1  

Introduction 

Congratulations on your purchase of the VTL MB-125 Monoblock Power Amplifier. 

he MB-125 Monoblock Amplifier, a powerful 125 watts per channel amplifier from the VTL 
monoblock amplifier family, represents the entry level monoblock using our pure tube design.  This 
pair of high performance monoblock amplifiers is designed to deliver a most involving and true-to-live 
listening experience to you.  Proper care and maintenance of the 

MB-125’s

 will assure their lasting 

value and maximum performance.  Please take a moment  to read through this owner’s manual and please take 
time to get familiar with the features of this product, so that you can become familiar with the operating and 
maintenance procedures needed for the MB-125’s. After you have finished reading this manual please keep it 
in a safe place for  future reference. 

The VTL team is proud that you have selected the MB-125 power amplifiers as a new member of your home 
audio system.  We sincerely hope that the VTL MB-125’s will contribute towards your enjoyment of music and 
give you many hours of listening pleasure. 

Symbol Conventions used in this guide 

Certain symbols are used in this owner’s manual to draw your attention to important points being discussed. 
For your own safety and that of your equipment you should note and heed the warnings that follow these 
symbols. 

 

The “Warning - Pay particular Attention” symbol used is 

and the “Warning - Observe These Precautions For Your Safety” is

 

Electrical Safety Notice 

Electrical voltage from power cables is hazardous. We recommend that the power cord connected to this unit 
be used with a properly grounded outlet. To prevent electrical shock do not remove any of the covers of this 
amplifier, especially while the unit is powered on.  

 

Water and Moisture 

The amplifier should not be used close to any water or moisture sources.  If liquid enters the amplifier it must 
be immediately unplugged and returned to your dealer for servicing. If this occurs you should under no 
circumstances try to power the unit on before the unit has been properly serviced by a trained repair technician 
- there are hazardous voltages present in this unit that can cause serious injury if they come in contact with you. 

 

MB-125 Owner’s Manual 
VTL 

1

Summary of Contents for MB-125























Reviews: