SCA3000 DEMO KIT
User Manual
VTI Technologies Oy
10/21
www.vti.fi Doc.Nr.
8259300.11
Rev.0.11
SETUP
display presents some operational
parameters of selected component type,
please refer to component specific
documentation for further information.
“Data transfer wait [ms]” is the delay in GUI
software between the successive data
readings from virtual serial port. If the GUI
sw does not run properly, user can try if
increasing this delay results in better GUI
software functionality.
The used virtual serial COM port number
can be viewed from "Serial port" display.
This information is needed if the SCA3000
DEMO KIT is used without the GUI
software, see further details from section 5.
In this example the SCA3000 DEMO KIT
uses COM4 serial port.
Figure 12. Setup display.
RESET DEMO
initialises the GUI software.
µC software version is presented also. GUI
revision 0.16.5 can be executed with µC
software version 0.9.95. SCROLL display
opens after RESET by default.
Figure 13. Reset demo display.
