manualshive.com logo in svg

VTech wf6972, User Manual

Share
Download
VTech wf6972 User Manual Download Page 80

www.vtechphones.com

78

Important safety instructions

9JGPWUKPI[QWTVGNGRJQPGGSWKROGPVDCUKEUCHGV[RTGECWVKQPUUJQWNFCNYC[UDGHQNNQYGFVQTGFWEGVJGTKUMQHſTGGNGEVTKEUJQEMCPFKPLWT[KPENWFKPIVJGHQNNQYKPI

1.

Read and understand all instructions. 

2.

Follow all warnings and instructions marked on the product.

3.

Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 

4.

Do not use this product near water (for example, near a bathtub, kitchen sink, or swimming pool).

5.

Do not place this product on an unstable surface, such as a table, shelf or stand. This product may fall, causing serious damage.

6.

Slots and openings in the back or bottom of the base unit and handset are provided for ventilation. To protect them from overheating, these openings must not be blocked 
by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. This product should not be 
placed in any area where proper ventilation is not provided. 

7.

This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your 
dealer or local power company. 

8.

Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on. 

9.

Never push objects of any kind into this product through slots in the base or handset as they may touch dangerous voltage points or short out parts that could result in a risk 

QHſTGQTGNGEVTKEUJQEM0GXGTURKNNNKSWKFQHCP[MKPFQPVJGRTQFWEV

10. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the base or handset other than 

URGEKſGFCEEGUUFQQTUOC[GZRQUG[QWVQFCPIGTQWUXQNVCIGUQTQVJPEQTTGEVTGCUUGODNKPIECPECWUGGNGEVTKEUJQEMYJGPVJGRTQFWEVKUUWDUGSWGPVN[WUGF

 &QPQVQXGTNQCFYCNNQWVNGVUCPFGZVGPUKQPEQTFUCUVJKUECPTGUWNVKPVJGTKUMQHſTGQTGNGEVTKEUJQEM

12. Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions:

A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled onto the product. 
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operation instructions, as improper 
adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation.
E. If the product has been dropped and the base and/or handset has been damaged.
F. If the product exhibits a distinct change in performance.

13. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning.
14. Do not use the telephone to report a gas leak in the vicinity of the leak.
15. Only put the handset of your telephone next to your ear when it is in normal talk.
CAUTION: Use only the power adapter provided with this product. To obtain a replacement, call 1 (800) 222-3111. In Canada, call 1 (866) 288-4268.

SAVE THESE  INSTRUCTIONS

Summary of Contents for wf6972


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands