PHONE SETTINGS
28
7.4.3 Change the Flash Time
The default flash time is best suitable for your country and network operator. It is unlikely
that you should need to change this setting unless advised to do so.
1. Press
r
and
(
/
)
to select BS SET.
2. Press
r
and
(
/
)
to select FLASH.
3. Press
r
and
(
/
)
to select your desired flash time (SHORT, MID, LONG).
4. Press
r
to confirm.
7.4.4 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the base station. It
is used to protect your phone against unauthorized use. The default system PIN code is
0000.
1. Press
r
and
(
/
)
to select BS SET.
2. Press
r
and
(
/
)
to select CHG PIN.
3. Press
r
and you are requested to enter the 4-digit system PIN.
4. Enter the old system PIN.
5. Press
r
and enter the new system PIN.
6. Press
r
and enter the new system PIN again.
NOTE
If the new PIN entered in Step 6 is not matched with the new system PIN entered in
Step 5, user is requested to enter the valid system PIN again in Step 5.
7. Press
r
to confirm.
7.4.5 Set the ECO Mode
1. Press
r
and
(
/
)
to select BS SET.
2. Press
r
and
(
/
)
to select ECO MODE.
3. Press
r
and
(
/
)
to select ON or OFF.
4. Press
r
to confirm.
