VTech VT9013, User Manual

Page: 21 / 25

8.2.8 Reset the base settings to default settings
After system reset, the phone will return to its original settings.
In Idle:
1. Repeat steps 1 and 2 in section 8.2.1.
2. Press <OK> and <UP/DOWN> to select
System Reset.
3. Press <OK> to enter the 4-digit System PIN.
Note: 4-digit PIN is entered in . Once 4 digits are entered, the right soft key will become OK.
4. Press <OK> and <YES> to confirm resetting the base settings to default settings.
The base will restore to default settings and return to standby.
8.3 Set the Date, Time and Alarm
8.3.1 Set date and time
In Idle:
1. Press <Menu> and <UP/DOWN> to select
Settings
.
2. Press <OK> and <UP/DOWN> to select
select dd/mm or mm/dd date format.
8.3.2 Set an alarm
In Idle:
1. Press <Menu> and <UP/DOWN> to select Settings .
2. Press <OK> and <UP/DOWN> to select
Alarm .
3. Press <OK> and <UP/DOWN> to select Date/Tim e.
4. Press <OK> and <LEFT/RIGHT> to select 12 hour or 24 hour format.
5. Press <DOWN> and <LEFT/RIGHT> to
6. Press <DOWN> to enter the time.
7. Press <DOWN> to enter the date.
8. Press <OK> to confirm.
3. Press <OK> and <UP/DOWN> to select
4. Press <OK> to enter the alarm time using the 24 hour format.
5. Press <DOWN> and <LEFT/RIGHT> to select
Once /Daily/Off .
7. Press <OK> to confirm.
6. Press <DOWN> and <LEFT/RIGHT> to select the alarm melody.
****
18
Date /Time/Alarm .
Date/Time/Alarm .
8.2.7 Activate the ECO mode
Your telephone is provided with a low-emission mode. If ECO mode is activated,
as soon as you place the handset in the base station, the transmission power between
handset and base station is reduced to them minimum.
In Idle:
1. Repeat steps 1 and 2 in section 8.2.1.
2. Press <OK> and <UP/DOWN> to select
ECO Mode .
3. Press <OK> to select On to activate ECO mode.
4. Press <OK> to confirm.