11
WALL MOUNTING
1.
Choose a spot near an electrical
outlet and a telephone jack.
Your phone requires a modular
telephone jack and a standard
electrical outlet (120v AC). The
power cord is six feet long; make
sure there is an electrical outlet
within reach of the Base Unit. The
outlet should not be controlled by
a wall switch. If the switch is ever
turned off, the phone will not
operate.
2.
Position the wall mount bracket
on the base.
Line up the tabs on the wall
mounting bracket with the holes on
the bottom of the base. Snap the
wall mounting bracket firmly into
place.
3.
Mount the base on the wall.
Position the base so the mounting
studs will fit into the holes on the
bottom of the base. Position the
power cord to extend down the
wall. Slide the base down on the
mounting studs until it locks into
place.
4.
Connect the telephone line cord.
Insert one end into the TEL.LINE
jack on the back edge of the base.
Insert the other end into the wall
jack.
The Wall Mounting bracket is
designed to fit on standard Wall
Mounting plates.
5.
Plug the AC adapter into an
electrical outlet and the DC
connector into the power jack
located on the back of the Base
Unit .
PULSE
TONE
Wall
Summary of Contents for VT1923
Page 30: ......
