background image

11

4. Exercise care in handling batteries

in order not to short the battery with
conducting materials such as rings,
bracelets, and keys.  The battery or
conductor may overheat and cause
burns.

To purchase replacement battery
packs, call VTECH Communications at
1-800-595-9511.  In Canada, call
VTECH Electronics  at 1-800-267-
7377.

SPARE BATTERY CHARGER

The VT 1920c has a built-in spare
Battery Charger, which is located in the
cradle of the Base Unit.

NOTE: In order to benefit from this
feature, you must obtain an optional
Spare Battery from an authorized
VTech dealer, or by contacting VTech
Customer Service at 1-800-595-9511
in the U.S.A and 1-800-267-7377 in
canada.

Installation
Remove the Spare Battery charger
cover by pressing the release tab and
lifting up.

Place a battery pack in the Spare
Battery charger. Make sure the metal
charging contacts on the underside of
the battery pack are aligned with the
charging contacts in the Spare Battery
charger.

REPLACING THE BATTERY PACK

POWER

HS IN-USE

CHARGING

SPARE BATT

PAGE

DIGITAL

CORDLESS

900MHz

VT 1920c

POWER

HS IN-USE

CHARGING

SPARE BATT

PAGE

VT 1920c

DIGITAL

CORDLESS

900MHz

1920manual

1/28/99, 3:27 PM

11

Summary of Contents for VT 1920C









































Reviews: