manualshive.com logo in svg

VTech VT 1901, User Manual

Share
Download
VTech VT 1901 User Manual Download Page 15

15

GETTING STARTED

CHARGE THE HANDSET BATTERY
PACK BEFORE USE
T h e   b a t t e r y   p a c k   r e c h a r g e s
automatically whenever the handset is
in the base unit.  The battery pack must
be charged for 16 hours before using
your phone for the first time.

T

ONE

TONE PULSE
SELECTION

PULSE

HANDSET RINGER
The handset ringer is programmed ON
as the factory default setting.  Refer to
PROGRAMMING THE RINGER on
page # for more information.

SETTING THE TONE/PULSE SWITCH
The TONE/PULSE switch is located on
the bottom of the base unit and is
factory set to TONE.  If you have touch
tone service, do not change the switch
setting.  If you have rotary (Pulse)
service, set the switch to PULSE.

TELEPHONE
WALL JACK

AC
OUTLET

DC  9V

TEL  LINE

CONNECT TELEPHONE LINE CORD
Plug one end of the telephone cord into
a wall jack, and the  other end into the
back of the Base Unit.

SETTING UP YOUR VTECH VT 1901
Choose an area near an electrical
outlet and a telephone wall jack.

AC POWER ADAPTOR
Plug the AC power adaptor into an
electrical outlet and the DC connector
to the back of the base unit.

POWER

IN-USE

CHARGING

SPARE BATT

DIGIT

CORDLE

CHARGE THE
HANDSET
BATTERY PACK
FOR 16 HOURS
BEFORE USING

1901MANUAL

1/28/99, 3:29 PM

15

Summary of Contents for VT 1901


































Reviews:

No comments

Brands by name

Popular brands

Load more brands