VTech VSP600A Administrator And Provisioning Manual Download

Page: 56 / 123

Using the WebUI

Back to Contents

VSP600A Administrator and Provisioning Manual

Servicing Pages

Reboot

To manually reboot the VSP600A and apply settings that you have updated, click

Time and Date

On the Time and Date page, you can manually set the time and date, and the time and date
formats. You can also set the system time to follow a Network Time Protocol (NTP) Server
(recommended) or you can set the time and date manually.

The time and date settings are also available as parameters in the configuration file. See

“"time_date" Module: Time and Date Settings” on page 101

Network Time Settings

Setting

Description

Enable Network Time

Enables or disables getting time and date information for
your phone from the Internet.

Summary of Contents for VSP600A




























































































































Search results

Summary of Contents for VSP600A

Reviews:

Related manuals for VSP600A

Brands by name

Popular brands

VTech VSP600A, Administrator And Provisioning Manual

Search results

Summary of Contents for VSP600A

Reviews:

Related manuals for VSP600A

Brands by name

Popular brands