VTech VSP600A, Administrator And Provisioning Manual

Page: 42 / 123

Using the WebUI 42
Back to Contents
VSP600A Administrator and Provisioning Manual
Handset Settings
The Handset Settings allow you to configure account assignments and names for the
cordless handsets that are registered to the base station. For more information on
registering cordless handsets, see the VSP600/VSP601 User Guide.
The network settings are also available as parameters in the configuration file. See
“"hs_settings" Module: Handset Settings” on page 91 .
Account Assignments
The
Account Assignments
table lists the maximum of six handsets, even if there a fewer
handsets registered. The registration status of currently registered handsets does not affect
what is listed on this table.
The table always displays the maximum six accounts, even if there are fewer SIP accounts
enabled.
If you have not entered any unique handset names yet, then the default name of
"HANDSET" appears.
On the Account Assignments table, you can select which accounts will be available for both
incoming and outgoing calls on each handset.
The handset will first attempt to use the account you select under Default when going
off-hook.
Max Public RTP port Enter the upper limit of the RTP port range.
Setting Description