Pet Immunity
You can turn on the Pet Immunity feature on
your
VC7151-102A/VC7151-202A/
VC7151-302A
telephone system, so it ignores
any small or medium size pets (less than 25
kilograms).
Press
SENSORS
on the handset or
telephone base when idle, and then Press
or on the handset, or
CALLS
/ or
PHONEBOOK
/ to scroll to the desired
sensor.
-OR-
i. Press
MENU
on the handset or
telephone base when idle.
ii. Press or on the handset, or
CALLS
/ or
PHONEBOOK
/ to scroll
to Sensors, and then press
SELECT
.
iii. Press or on the handset, or
CALLS
/ or
PHONEBOOK
/ to scroll
to the desired sensor, and then press
SELECT
.
2. Press
OPTIONS
to enter the individual
sensor menu.
3. Scroll to Pet immunity, and then press
SELECT
.
4. Scroll to choose
On
or
Off
, and then press
SELECT
.
NOTE
You need to trigger the sensor by motion to
activate the change of Pet Immunity setting.
A message to this effect will appear on this
handset display.
As the motion sensor uses thermal body heat
to detect motion, the Pet Immunity function
works off thermal body heat parameters to an
approximate mass of 25kgs. If the pet gets too
close (within 2 metres), or too far (outside of
12 metres) from the sensor’s range, its
movement may still trigger the sensor as the
mass detection function may be affected by
proximity.
1.
•
•
General product care
Taking care of your sensor
Your sensor contains sophisticated electronic
parts, so it must be treated with care.
Avoid rough treatment
Place the sensor down gently. Save the original
packing materials to protect your sensor if you
ever need to ship it.
Avoid water
Your sensor can be damaged if it gets wet. Do
not use the sensor outdoors in the rain, or handle
it with wet hands. Do not install the sensor near a
sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power
surges harmful to electronic equipment. For your
own safety, take caution when using electrical
appliances during storms.
Cleaning your sensor
Your sensor has a durable plastic casing that
should retain its luster for many years. Clean it
only with a dry non-abrasive cloth. Do not use
dampened cloth or cleaning solvents of any kind.
Storage
When you are not going to use the sensor for
some time, remove the battery from the sensor.
Store the sensor in a cool and dry place.
Frequently asked questions
Below are the questions most frequently asked
about the sensor.
The sensor
does not
work at all.
Make sure the CR123A lithium
battery is installed.
The sensor may be deregistered
from the telephone base. Register
it back to your telephone base.
The sensor may be out of range.
Move the sensor closer to your
telephone base.
Important safety instructions
When using your equipment, basic safety
precautions should always be followed to reduce the
risk of fire, electric shock and injury, including the
following:
Adult setup is required.
This product requires professional installation.
Do not use this product near water. For
example, do not use it next to a bath tub, wash
bowl, kitchen sink, laundry tub or swimming
pool, or in a wet basement or shower.
Do not place this product on unstable shelves,
stands, tables or other surfaces.
This product should not be placed in any area
where proper ventilation is not provided. Slots
and openings in the back or bottom of this
product are provided for ventilation. To protect
them from overheating, these openings must
not be blocked by placing the product on a soft
surface such as a bed, sofa or rug. This product
should never be placed near or over a radiator
or heat register.
Never push objects of any kind into this product
through the slots because they may touch
dangerous voltage points or create a short circuit.
Never spill liquid of any kind on the product.
Periodically examine all components for
damage.
Children should be supervised to ensure that
they do not play with the product.
The product is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance by
a person responsible for their safety.
SAVE THESE INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
Battery
CAUTION
: Use only the battery indicated in this
manual. There may be a risk of explosion if a
wrong type of battery is used for the sensor unit.
Do not dispose of the battery in a fire. Check
with local waste management codes for special
disposal instructions.
Do not open or mutilate the battery. Released
electrolyte is corrosive and may cause burns or
injury to the eyes or skin. The electrolyte may be
toxic if swallowed.
Exercise care in handling battery in order not to
create a short circuit with conductive materials.
•
•
•
•
Technical specifications
Transmit frequency
1881.792 MHz - 1897.344
MHz
Channels
10
Sensor operating
temperature
0°F (-18°C) to 130°F (49°C)
Nominal effective
range
Actual operating range
may vary according to
environment conditions at
the time of use.
Power requirements Battery: Lithium 3V
Battery type: CR123A
Disclaimer
This product is not designed for security purposes.
When properly installed and maintained, this product
may in some cases reduce the risk of burglary, fire,
robbery or other events occurring without providing
an alarm. VTech is not responsible for losses, injury,
or damage resulting from the use of this product.
VTECH TELECOMMUNICATIONS LTD.
A member of THE VTECH GROUP OF
COMPANIES.
© 2016 VTech Telecommunications Ltd.
All Rights Reserved. 06/16. V2.0.
