5
Building Tips
When attaching a track piece to a
TRACK SUPPORT
, insert the
track into one side of the
TRACK SUPPORT
at an angle. Once one
corner of the track is on the inside of a
TRACK SUPPORT
tooth,
straighten the track so the other corner fits inside the other
TRACK
SUPPORT
tooth as show below.
1. Build track configurations on a smooth, hard surface for best results.
2. Do not build configurations that are more than three levels.
3. Do not use these track pieces with
Toot-Toot Drivers
®
motorised
or rC vehicles.
4. For maximum stability, place the track supports where the track
pieces join together as shown below.
- Three track supports are necessary when joining two or three
tracks together.
BUIL
DING
T
IP
S
1
2
3
