ACTIVITIES
1.
Slide the
ON/OFF SWITCH
to turn the unit
ON
. You will hear sounds, a song and a
phrase. The light will flash with the sounds.
2.
Press the
LIGHT-UP BUTTON
to hear
sounds, songs and phrases. The light will
flash with the sounds.
3.
Press down on the vehicle quickly or slowly
to hear fun sounds and phrases. Release the
vehicle to watch it roll forward on its own. The
light will flash with the sounds.
4.
Push the vehicle to hear fun sounds and
melodies. While a melody is playing, push the
vehicle again to add in fun sounds on top of
the melody. The light will flash with the sounds.
Note
:For optimal performance, we recommend
using Press & Race™ vehicles on smooth
flat surfaces or Go! Go! Smart Wheels
®
tracks
(sold separately).
5.
For added fun, the vehicle interacts with other
VTech
®
Toot-Toot Drivers
®
tracks. Simply
roll the vehicle over one of the play set’s
SmartPoint
®
locations to see the light flash
and to hear greetings, fun sounds, short tunes
and sing-along songs (tracks sold separately)
(Selected SmartPoints only).
3
4
IMPORTANT NOTE:
Creating and developing
VTech
®
products is accompanied by a responsibility
that we take very seriously. We make every effort to ensure the accuracy
of the information, which forms the value of our products. However, errors
sometimes can occur. It is important for you to know that we stand behind
our products and encourage you to call our Consumer Services Department
on 01235 546810(from UK) or +44 1235 546810 (outside UK), with any
problems and/or suggestions that you might have. A service representative
will be happy to help you.
CARE & MAINTENANCE
1.
Keep the unit clean by wiping it with a slightly damp cloth.
2.
Keep the unit out of direct sunlight and away from any direct heat source.
3.
Remove the batteries when the unit is not in use for an extended period of time.
4.
Do not drop the unit on hard surfaces and do not expose the unit to moisture
or water.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions, please
follow these steps:
1.
Please turn the unit
OFF
.
2.
Interrupt the power supply by removing the batteries.
3.
Let the unit stand for a few minutes, then replace the batteries.
4.
Turn the unit
ON
. The unit should now be ready to play again.
5.
If the product still does not work, replace with a new set of batteries.
If the problem persists, please call our Consumer Services Department on 01235
546810 (from UK) or +44 1235 546810 (outside UK) and a service representative
will be happy to help you.
Summary of Contents for Toot-Toot Drivers Press ‘n’ Go Vehicle
Page 3: ......
