4
INSTRUCTIONS
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned
OFF
.
2. Locate the battery cover on the bottom of the unit. Use a coin or
screwdriver to loosen the screw.
3. If used batteries are present, remove these batteries from the
unit by pulling up on one end of each battery.
4. Install 3 new ‘AAA’ (AM-4/LR03)
batteries following the diagram
inside the battery box. (For best
performance, alkaline batteries or fully
charged Ni-MH rechargeable batteries
are recommended).
5. Replace the battery cover and tighten
the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as recommended
are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.
Summary of Contents for TOOT-TOOT CORY CARSON Eileen Ice Cream Van
Page 1: ...Eileen Ice Cream Van Parent s Guide 91 003936 001 UK...
Page 2: ......
