24
Basic Operation
“Set Audible Message Alert ”
When Message Alert is turned on, the base beeps
Off*
once every 10 seconds when new messages
On
have been received.
“Set Announce Only”
When you turn
Announce Only On
, callers hear
Off
*
your announcement, but cannot leave a message.
On
“Set Base Ringer”
Turn the Base ringer on or off.
On
*
Off
“Set Number of Rings”
Choose how many times the phone will ring
2
before the system answers a call.
4*
With Toll Saver active, the system answers after two
6
rings when you have new messages and after
Toll Saver
four rings when you have no new messages.
NOTES:
1. To advance the remote access code by increments of 10, press and hold
CHANGE
.
2. You can exit Feature Setup at any time by pressing a
MAILBOX
button.
Setting Up Your Answering System
You can set up one feature at a time, or you can set up the first feature and then
move on to set up the remaining features in sequence.
1. Make sure the answering system is
ON
.
2. Press
MENU
until the system announces the feature you want to set.
Refer to the
Feature Summary
below for a description of the features and
your choices.
3. Press
CHANGE
until the system announces the desired setting.
4. Press
TIME/SET
to confirm your selection.
5. Press
MENU
to move on to the next feature, or press a
MAILBOX
button to
save and exit Feature Setup.
Feature Summary
Default settings indicated by
*
.
System announces: Description/directions:
“Set Security Code”
Press
CHANGE
to choose the remote access code
you will use to access features and functions of the
answering system from a touch tone phone. You can
select any two digit code, from 40 to 99.
System announces: Description/directions:
Answering System Operation
50*
