Checking the Ringer
To check the ringer which is currently
programmed, do the following:
• Press PROG.
• Press the # key.
• Press 0.
• Press the MEM key to confirm.
Memory Dialing
• The VT2418 can store up to 10 different
phone numbers that you can dial just
by pressing PHONE, MEM and one of
the number keys (0-9)
Programming Speed Dial Numbers
The Handset must be OFF.
• Press PROG. The IN USE LED will
blink to indicate that you are in the
programming mode.
• Press the number of the memory
location you wish to store the number
in (0-9).
• Using the dial pad, dial the number
you want to store. The number can
be up to 16 digits long. The number
can be entered manually or by using
REDIAL.
• Press MEM to store the phone number
to the key you selected.The phone
exits PROG mode and emits a tone.
Speed Number Dialing
• Press PHONE to get a dial tone.
• Press MEM and the memory location
number key (0-9).
• For example, to dial the number you
assigned to key ‘8’, you would press
PHONE, MEM, 8.
To Change or Replace a Speed Dial
Number
• To change or replace a stored number
in speed dial memory, simply enter the
new number and store it in the memory
location you wish to change.
Basic Operation
11
Operating Instructions
