WARNING: All packing materials, such as tape, plastic sheets,
wire ties and tags are not part of this toy, and should
be discarded for your child’s safety.
Attention : Pour la sécurité de votre enfant, débarrassez-vous de
tous les produits d’emballage tels que rubans adhésifs,
feuilles de plastique, attaches et étiquettes. Ils ne font
pas partie du jouet.
NOTE: Please keep this instruction manual as it contains important
information.
Demo strip removal:
When the product is taken out of the packaging, please remove the
demo strip from the unit to activate normal play mode.
Unlock the packing locks:
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned
OFF
.
2. Locate the battery cover on the
back of the unit. Use a coin or a
screwdriver to loosen the screw.
3. Install 2 new ‘AA’ (AM-3/LR6)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended
f o r m a x i m u m p e r f o r m a n c e . )
4. Replace the battery cover and
tighten the screw to secure.
Getting St
ar
ted
Rotate the packing locks
90 degrees counter-clockwise
Pull out the packing locks
