9
Appendix
Troubleshooting
If you have dfficulty wth your audo montor, please try the
suggestons below.
My audio monitor does not work at all.
Make sure the baby unt, parent unt and the batteres are nstalled
and charged correctly. For optmum daly performance, charge the
parent unt when t s not n use.
Make sure the power adaptors are securely plugged nto the outlet
not controlled by a wall swtch.
Make sure the adaptor cords are plugged firmly nto the baby unt
and parent unt.
Make sure the baby unt and the parent unt are turned on.
The parent unt may be too far away from the baby unt. Move the
parent unt closer to the baby unt (but not less than 1.5 metres).
Unplug the electrcal power to the baby unt and parent unt. Wat
for approxmately 15 seconds, then plug t back n. Turn on the baby
unt and the parent unt. Allow up to one mnute for the baby unt
and the parent unt to synchronse.
Charge the batteres n the parent unt for up to 12 hours.
If the parent unt batteres are completely depleted, they may take
up to 30 mnutes to charge the parent unt before t can be used for
a short tme.
Remove the batteres and then nstall them agan. If that stll does
not work, t may be necessary to purchase new batteres.
Large obstructons may mpact the recepton. Try to relocate the
baby unt, away from large obstructons such as walls and doors.
Other electronc products may cause nterference wth your audo
montor. Try nstallng your audo montor as far away from these
electronc devces as possble: wreless routers, rados, cellular
telephones, ntercoms, room montors, televsons, personal
computers, ktchen applances and cordless telephones.
The audio monitor produces high-pitched noise.
The parent unt may be too close to the baby unt. Make sure the
parent unt and the baby unt are at least 1.5 metres away from one
another.
•
•
•
•
•
•
•
•
•
•
•
•
