VTech Power Zone Plus Desktop, User Manual, Page: 15 / 54

7
5. Type in a name for the new user. This name should typically be your child’s
name. If you have multiple
Power Zone™ Plus Desktop learning products,
the account names must be different for each product.
6. Click on the New User button to confirm the new user name.
Installing Other Bundled Applications
The
VTech ®
Desktop Software CD-ROM includes additional applications:
Microsoft ® Internet Explorer 5.5
Netscape
®
Communicator 4.76
Adobe
®
Acrobat
®
Reader
™
4.05
1. Insert the VTech ® Desktop Software CD-ROM into the CD-ROM drive on your
computer. Setup should start automatically.
2. If Setup does not begin automatically, on the Windows Start menu, click
Run, and then type d:\autorun\autorun, where d is the letter assigned to the
CD-ROM drive containing the
VTech
®
Desktop Software CD-ROM.
3. A setup menu will be shown. Select the application you want to install.
4. Follow the on-screen instructions.
5. Click FINISH to complete the installation.
6. You may be prompted to restart your computer.
If Your Unit Doesn’t Turn On or Stops Responding
If Power Zone™ Plus Desktop does not turn on when pressing the POWER button,
or if Power Zone™ Plus Desktop suddenly stops responding, the batteries may
need to be replaced or Power Zone™ Plus Desktop may need to be reset.
1. Before trying new batteries, press and hold the RESET button on the category
selector. Use the tip of a paperclip, or a similar object without a sharp tip, to
gently press the RESET button. The unit will shut down with a beep sound.
Press the POWER button to turn on
Power Zone™ Plus Desktop again.
2. Check your batteries. Make sure the batteries are fresh and installed properly.
Still Having Problems?
If the problem still persists, we encourage you to contact our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-800-267-7377 in Canada with any
problems and/or suggestions that you might have. A service representative will
be happy to assist you.
Before requesting support, please be ready to provide the information below:
• The name of your product or model no. (The model no is typically located on
the back or bottom of your product.)