4
NOTE: If the unit suddenly stops working or the sound becomes weak, turn the
unit OFF for 15 seconds, then turn it back ON. If the problem persists,
it may be caused by weak batteries. Please install a new set of batteries
and try the unit again.
AC ADAPTOR CONNECTION
Use a 14.5V 4.5VA center-positive
adaptor.
1. Make sure the unit is OFF.
2. Locate the adaptor jack on the back of the unit.
3. Plug the adaptor into the unit’s adaptor jack.
4. Plug the adaptor into a wall outlet.
5. Turn the unit ON.
NOTE: Do not leave the adaptor plugged in for long periods of time if the unit
is not in use.
ON/OFF BUTTON
ON
OFF
Turn ON your VTECH
®
Power Zone™ 2000 learning aid by pressing
the ON button on the front panel. The unit will show an opening animation
and you can select a category or an activity. Turn the unit OFF by
pressing the OFF button on the front panel.
RESET BUTTON
If the ON button is unable to turn on the unit or if the unit suddenly stops working,
press RESET button on the bottom of the unit to restart.
AUTOMATIC SHUT-OFF
If there is no input into the VTECH
®
Power Zone™ 2000 learning product for
several minutes, the unit will automatically shut off to save power. After the
automatic shut-off is activated, you need to press the ON button again. We
recommend that you turn the unit OFF when not playing with it. If the VTECH
®
Power Zone™ 2000 learning product is not going to be used for a long period,
remove the batteries and unplug the adaptor.
VOLUME SWITCH
Adjust the volume by sliding the Volume Switch up to raise the
volume and down to lower the volume.
Untitled-3
10/16/01, 2:37 PM
4