4
INSTRUCTIONS
Battery Removal and Installation
1. Make sure the unit is turned
Off
.
2. Find the battery cover located on the bottom
of the unit and use a coin or screwdriver to
loosen the screw and open the battery cover.
3. Remove old batteries by pulling up on one end
of each battery.
4.
Install 2 new AA (AM-3/LR6) batteries
following the diagram inside the battery box.
(For best performance, alkaline batteries or
fully charged Ni-MH rechargeable batteries
are recommended).
5.
Replace the battery cover and tighten the
screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.
