Telephone operation
PTT to a single handset
You have four ways to begin a PTT call:
If you have a two-handset system, press and hold
PUSh TO TALK
when the handset is not in use.
Press
PUSh TO TALK when the handset is not in use. Then use the
dialing keys to enter the destination handset number.
Press
PUSh TO TALK when the handset is not in use. Press /
VOL
or
VOL
/
CID
to highlight the destination handset number and then press
MeNU
/SeLeCT or PUSh TO TALK.
a) Press
MeNU/
SeLeCT
when the handset is not in use.
b) Press
/
VOL
or
VOL
/
CID
to highlight >
Push to talk, then press
MeNU
/SeLeCT.
c) Select the destination handset number by pressing
/
VOL
or
VOL
/
CID
or by using the dialing keys.
d) Press
MeNU
/SeLeCT or PUSh TO TALK.
Your handset screen shows
Connecting to hANDSeT X... for a few
seconds. When the connection is made, both your and the destination
handset screens display
Press and hold [PTT] to talk and beep once.
Press and hold
PUSh TO TALK on your handset. A chirp indicates your
microphone is on. Speak towards the handset. Your voice is broadcast to
the destination handset.
While you are speaking, your handset screen shows
PTT To hANDSeT X
(
X represents the destination handset number).
Release
PUSh TO TALK after speaking. Both handsets beep once again.
After the handsets beep, you can press and hold
PUSh TO TALK to
continue speaking or the destination handset can respond (see
Answer
PTT on page 26).
To end the PTT call, press
OFF/
CLeAr
or place the handset in the
telephone base or charger. The handset screen shows
Push to talk
ended for a few seconds.
1.
•
•
•
•
2.
3.
4.
24
After
PUSh TO TALK is released, the PTT call remains open for a short
time. If no one presses
PUSh TO TALK within 10 seconds, the PTT call
ends automatically.
