39
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between
the equipment and receiver.
• Connect the equipment into
an outlet on a circuit different
from that to which the receiver is
connected.
• Consult the dealer or an
experienced radio/TV technician
for help.
WARNING: Changes or modifications
to this equipment not expressly
approved by the party responsible
for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of
the FCC rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation. Privacy of
communications may not be ensured
when using this phone.
To ensure safety of users, the FCC/
ISEDC has established criteria for the
amount of radio frequency energy
that can be safely absorbed by a
user or bystander according to the
intended usage of the product.
This product has been tested and
found to comply with the FCC/ISEDC
criteria. The handset may be safely
held against the ear of the user. For
body worn operation, this handset
has been tested and meets the FCC
RF exposure guidelines when used
with the accessories supplied or
designated for this product. Use of
other accessories may not ensure
compliance with FCC RF exposure
guidelines. The telephone base shall
be installed and used such that parts
of the user’s body other than the
hands are maintained at a distance
of approximately 20 cm (8 inches) or
more.
This Class B digital apparatus
complies with Canadian requirement:
CAN ICES-3 (B)/NMB-3(B)
FCC Part 68 and ACTA
This equipment complies with Part 68
of the FCC rules and with technical
requirements adopted by the
Administrative Council for Terminal
Attachments (ACTA). The label on the
back or bottom of this equipment
contains, among other things, a
product identifier in the format
US:AAAEQ##TXXXX. This identifier
must be provided to your telephone
service provider upon request.