background image

8

Installation of Battery Cells in Handset

Setup

Follow the steps below:

1.  Remove the battery cover by pressing

on the indent and sliding downward.

2.  Place the new battery cells in the

Handset with the positive and
negative poles aligned in the
battery compartment.

3. Replace the battery cover by sliding

it upwards.

4. If the new battery cells are not

already charged, place the
Handset in its Charger, and allow it
to charge for 12 hours. After initial
charge, a maintenance charge of 8
hours should be sufficient.

Getting Started

Charging of the Handset Battery Cells

The Handset of your cordless telephone is powered by rechargeable battery
cells. It charges automatically whenever the Hand-
set is in its charger.
You should charge the battery pack for 12 hours
when you first receive your phone. 
You’ll know
the battery pack needs charging when:

•   The low battery message is displayed :
•   The Handset seems completely dead, the LCD is completely clear and does

not activate when you press the keys.

IMPORTANT:

1. Do not dispose of battery cell in a fire, the cell may explode.
2. Do not open or mutilate the battery cell. Toxic substances may be released,

causing harm to eyes or skin.

3. Exercise care in handling battery cell in order to prevent an accidental short

of the charge contacts, potentially causing the battery pack to overheat.

4. Do not dispose of this battery cell into household garbage. Please refer to the

information concerning proper battery recycling.

Summary of Contents for ip5850











Reviews: