30
Basic Operation
Handset Settings
Call Forward
A Handset on an external call can forward it to the
other Handset by holding down the INT key.
The display will initially show:
If the Base can connect to the other Handset,
the display will change to:
And then return to the idle display.
by pressing INT to reconnect to the external call.
If the Base cannot find the other Handset as a
result of it being out of range or powered off, the
display will show:
And the external will ‘call back’ to the Handset.
Call Transfer
An external call is transferred by:
1. Press INT key (the external call is put on hold)
2. Destination Handset will ring, showing an
intercom call.
3. Pressing the ON key on the destination
Handset will answer the intercom call.
4. Inform the person using the destination Handset
that they have a call on hold.
5. Press OFF, on the first Handset, to tran sfer
external call to other Handset.
If there is no answer on the destination Handset,
the first Handset can reconnect to the held call
Temporary Tone
When the phone is set for pulse dial mode, it is possible to switch to temporary
Tone mode during an ongoing call by pressing * . Once pressed, TONE will be
used for the rest of the call. After you hang up, the phone will return to pulse dialing
for the next call.
Call Forward & Call Transfer
An external call can be forwarded or transferred from one Handset to the other
Handset. The difference between forward and transfer depends on if the send-
ing Handset needs to talk with the receiving Handset,
