VTech Innotab 3, User Manual

Page: 8 / 40

4
Battery Compartment Insert 4 AA batteries (not included). For battery
installation instructions, please see the next
section.
InnoTab
®
Cartridge Port Insert an InnoTab
®
cartridge (sold separately) into
this slot to play.
Brightness Button Press this button to adjust the screen brightness.
Slide this switch to open the battery doors. Always
replace the
InnoTab
®
3 Baby battery doors after
changing batteries.
microSD Card Slot Insert a microSD memory card (not included).
(NOTE:
InnoTab
®
3 Baby is compatible with
microSD memory cards up to 32GB.)
Headphone Jack Use this to connect headphones (sold separately).
For safety, we do not recommend using headphones
until your child is 3 years or older.
Note: Maximum output voltage
≤
150mV.
USB Port Plug the included USB cable into this USB port
to connect the tablet to your computer.
Battery Installation
• Make sure the tablet is turned off.
• Use a coin or a screwdriver to unlock and remove the protective case.
• Locate the battery door lock sliding switch on the back of the tablet. Slide the
switch to open the battery covers, then remove the covers.
• Insert 4 AA batteries as shown in image.
• Make sure to replace the battery covers.
• Replace the protective cover. Use a coin or a screwdriver to secure the cover.
GE
TTiNG ST
arTEd